Ride on Scrubbers

A new compact Ride-On absolutely bristling with practical innovation and user convenience.

In truth the CRO8055 is competitive with most walk behinds of the same size. So now you can sit rather than walk and by virtue of the exceptional manoeuvrability, substantial time will be saved on middle size applications.

The CRO8055 also introduces the logic of two machines in place of something much bigger or, to put it another way, Two for the Price of One with added versatility and convenience.

The CRO will go into places where bigger machines are not suitable and anything smaller is just too small.

  • 80 litre clean and dirty water heavy duty polyform tanks, allowing large areas to be cleaned in a single fill.
  • Compact design, easy cleaning in those tight spaces
  • Anti-tip system, prevents the machine from tipping when cornering sharply
  • On-board charger port, hassle free charging
  • Flexifill extending and flexible filling hose, fill from any clean water outlet
  • TwinFlo vacuum motor, providing exceptional wet pick up


Vacuum Motor Power 24V 400 W
Brush Motor Power 24V 600 W
Power CRO-8055/120 = 2 X 12V (24V) = 120 Ahr,
CRO-8055/100 = 2 X 12V (24V) = 100 Ahr
Run Time CRO-8055/120 = 3 Hrs, CRO-8055/100 = 2 Hrs
Traction Drive 24V 400 W
Transit Speed 0-6.0Km/h
Cleaning Speed 4.2km/h
Scrub Width 550 mm
Brush Speed 150 rpm
Water Capacity 80L
Water Flow Rate 3L/min 2L/min 1.5L/min 1L/min 0.5L/min
Weight 280 kg
Dimensions 1160x1460x805mm

Innova 55 B ride on scrubbing machine, thanks to its very compact dimensions is able to replace a traditional walk behind scrubbing machine in maintenance cleaning of surfaces up to 3,000 sq. m.

Comac designed a scrubbing machine that is extremely convenient: indeed, with the same investment intended for a walk behind model is possible to have Innova 55 B that is more user-friendly and faster in cleaning operations.

The reduced dimensions and the driving wheel of automotive inspiration give to this model the needed manoeuvrability to perform in small spaces, going very easily around obstacles to complete cleaning operations in shorter time than a walk behind scrubber with a considerable saving on cleaning costs.

Innova 55 B is a ride on scrubbing machine with automatic traction, available in battery version with single disc brush of 56 cm working width.

It is available in basic version with the technology for consumption optimization and Eco ON/OFF System that automatically stops the brush and water flow when the machine is idle.

On request it is available also with on board battery charger.

Innova is the highly user-friendly scrubbing machine suitable for maintenance cleaning of surfaces up to 6000 sq. m, which allows a dramatic reduction in the cost of cleaning.

It is available in the version with 1 disc brush, with a working width of 61 cm, in the version with 2 disc brushes, with working width of 65, 75, 85 and 100 cm and in the version with 1 cylindrical brush with a working width of 69 cm.

Innova 60 B was designed in order to replace a walk-behind scrubbing machines, with the aim to drastically reduce sq. m scrubbed cost offering a real competitive advantage, particularly for the end user. Innova offers the economic advantage to be used up to four non-stop working hours thanks to the optimization of energy consumption. The compact size allows the machine to pass even through traditional doors or be transported in lifts.

Innova 65/75/85/100 B / M - 70 S are scrubbing machines which guarantee a dramatic reduction in the cost of cleaning thanks not only to an advantageous purchase price but also to the complete equipment of all Comac systems that reduce waste and consumption (automatic version). It is possible to choose between the manual version (Innova M) where the squeegee and the brush head are controlled by two independent levers for a very simple and immediate use and the automatic version equipped with a working program selector which allows to choose among four pre-set working programs: once selected the most suitable program, the operator has only to drive it and Innova does all the thinking..

A more user friendly ride on scrubber dryer would be hard to find. Designed to provide long, simple and reliable service day in day out whatever the environment.

The TRO650 is based on the well established engineering of the Vario model but simplified to provide a truly professional, cost effective workhorse.

The TRO650 is blessed with a commanding operator driving position, front wheel traction drive, a magnificent turning circle and one pass performance that really will ensure you get the standard you want, exactly when you want it... and fast.


Vacuum Motor Power 24V 600 W
Brush Motor Power 2 x 24V 400 W
Power 4 X 12V (24V) = 200 Ahr
Run Time 3.5 Hrs
Traction Drive 600 W
Transit Speed 0-7.0km/h
Cleaning Speed 4.2km/h
Scrub Width 650 mm
Brush Speed 200 rpm
Water Capacity 120L
Water Flow Rate 3L/min, 2L/min, 1L/min, 0.5L/min
Climbing Gradient 11%
Weight 436 kg
Dimensions 1676 x 1425 x 1054 mm

Twintec Vario – proof that 3 into 1 does go!

This is about the most user friendly ride-on around, packed with sound common sense engineering yet bristling with technology.

In simple terms the Twintec Vario ride-on rewrites the mathematical rule book proving once and for all that… 3 INTO 1 DOES GO!

Yes one machine which can be set to 3 different working widths, 650mm, 750mm and 850mm and all at the flick of a simple lever. This doesn’t even need tools – anybody can do it at any time. You want it wide – fine… you want it narrow – 30 seconds is all that it takes.

In many applications changing circumstances change specific needs so with Vario you can vary the specification to suit your exact requirements. It’s not only the working widths that can be changed, it’s the operating performance that is under the drivers complete control – cleaning speed, brush speed, water flow, chemical mix …you name it and you control it.

Whatever you may be told, every application is quite different for many reasons – but trying to second guess the final specification in advance is not an exact science and not that easy. With the Vario you have so many factors that can be varied or preselected to suit any given situation or any changing circumstances.

You really are “master of all you survey”.

Once trials have been completed and operational settings determined, the Vario can be programmed to include a series of PRESETS which will allow different settings to be added to the memory, all of which can be retrieved at a simple push of a button as required.

In addition to the extreme versatility of performance, there is a selection of brush and pad specifications to suit different needs and additional battery packs to extend the cleaning range as required.

Note: Brushes supplied with machine may vary to those pictured.


Brush Motor Power 3 x 24V 400 W
Vacuum Motor Power 24V 400 W
Power 6 x 12V (24V) = 300A/H
Run Time 3.5 Hrs
Traction Drive 600 W
Transit Speed 7.0 km/h
Cleaning Speed 3.5 km/h
Climbing Gradient 11%
Scrub Width 650 mm
750 mm
850 mm
Brush Speed 50/100/150/200 rpm
Water Capacity 120 L
Nuchem Capacity Optional 4 L
Water Flow Rate 4L/min
Nuchem Mix 25:1
Weight 500 kg
Size 1676 x 1425 x 1054 mm